Hoover Vacuums - Recent Questions, Troubleshooting & Support


PUT SOME VASELINE ON THE GASKET AND TRY AGAIN

Hoover Vacuums | Answered on Dec 08, 2019


Nine years later, and this page was a godsend! However, the price of a new turbine simply wasn't cost effective, so I opened up the turbine and found a rusted, seized bearing. Don't let the idea of fixing the turbine scare you... it's not difficult at all if you know how to use a Phillips screwdriver. And if it's not working now, you aren't going to make things worse.

A bit of Internet searching will show you how to open the turbine, but even without a set of instructions, don't be afraid to take out those four screws. I was fortunate: I pulled that rusted bearing and went to Akron (Ohio) Bearing and showed them the old one. In 30 seconds the guy behind the counter handed me the identical bearing. I cleaned up all the plastic gears in the turbine, regreased them, and had it back together in no time. You don't live in Akron, Ohio?? - Just look for a bearing business in a city near you.

Hoover Steam Vac... | Answered on Dec 04, 2019


Important Notice Regarding Hoover WindTunnel Series REWIND Bagless Upright... I found some interesting reading here that could pertain to you. Thank you and leave feedback for I am new at this. James please have a great day!

Hoover U6437-900... | Answered on Nov 27, 2019


Log inTo Microsoft account. Go to support and search for "find lost Nokia N8".

Hoover Vacuums | Answered on Nov 26, 2019


https://www.ebay.com/itm/Hoover-Bissell-Dirt-Devil-Steam-Vac-clean-out-Nozzle-tool-39514001-90001297/283579760851?hash=item4206abc0d3:g:SMMAAOSw3G1ZzS97

Hoover Vacuums | Answered on Nov 23, 2019


CHECK WITH A DEALER

Hoover Vacuums | Answered on Nov 21, 2019


MAKE SURE TANK IS MAKING A GOOD SEAL SOMETIMES I HAVE TO VASELINE MINE THE GASKET DRIES OUT

Hoover Vacuums | Answered on Nov 20, 2019


Go to your owner's manual, page 12. Remove the belt cover pieces and inspect the function of the belts and brushes, turning them by hand to confirm mechanical connection to the motor. Find the inoperative part and replace it, then simply reassemble the unit and start cleaning your carpet. ;)

Hoover Vacuums | Answered on Oct 26, 2019


this video may help you

Hoover U6437-900... | Answered on Oct 24, 2019


There are different models of Hoover Legacy Upright vacuum, but in general, you unlatch the front cover, and pull the old bag off. The cardboard flange of the new bag goes over the tube near the top of the bag compartment

https://www.manualslib.com/manual/70085/Hoover-Legacy-Supreme-S2200.html?page=9#manual

Hoover Vacuums | Answered on Oct 21, 2019


https://www.google.com/url?q=https://www.ereplacementparts.com/hoover-fh50039-max-extract-dual-steam-vacuum-parts-c-37315_139681_139686.html&sa=U&ved=2ahUKEwiqqaHD26DlAhVRTxUIHSjDAVsQFjAAegQIAhAB&usg=AOvVaw1zwb6KrsOjvxYbzlJjXM2E

Hoover Vacuums | Answered on Oct 16, 2019


The key is removing the gray top cover plate and then it is easy enough to figure out from there. Underneath on the black plate you put the brush into the furthest holes there are screws that are holding the front of the gray top plate. Remove the other black plate like a trapezoid shape on the bottom just by pulling down on the widest part. After removing that you will see four more screws in the clear part hidden deep in holes. Two are just in front of the wheels and then another two about an inch away going towards the brush part. From then it is just a matter of separating the body to be able to remove the part and replace.

Hoover FloorMate... | Answered on Oct 10, 2019


It's an issue that the front roller isn't engaged. there's usually a belt connected to the roller on one side of it. That belt is connected to the same motor that develops the suction. You have to find that area and either pull the belt over the motor and/or the brush. Close it back up and turn it on again.

Hoover Vacuums | Answered on Oct 05, 2019

Not finding what you are looking for?
Hoover Logo

7,147 questions posted

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Kirk Thompson

Level 1 Expert

11 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Brad Brown

Level 3 Expert

18127 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...