Hoshizaki Freezers - Recent Questions, Troubleshooting & Support


Ice thickness probe on Manitowoc and float switch may be dirty or stuck if hoshi. Manitowoc sometime the thickness probe can get dirty and a film of algae and not sense ice properly but rare

Hoshizaki... | Answered on Jan 21, 2020


go to their web site. lots of good info. too much to get what you need here. lots to concider when installing. self contained? remote condenser? location of unit. and lots more. tech support 1-800-233-1940 may shed some light too

Hoshizaki... | Answered on Nov 21, 2019


If you want the ice maker work. you will to pay for the repair, If you want you cam another company.. Or you can do nothing which is nothing

Hoshizaki... | Answered on Jul 04, 2019


How to repair
12_1_2018_8_35_14_am.jpg

Hoshizaki... | Answered on Dec 02, 2018


https://download.partstown.com/is-bin/intershop.static/WFS/Reedy-PartsTown-Site/-/en_US/manuals/HOS-AM-100BAE_sm.pdf
since your info is so limited, try this web site for the manual for your machine as see if there is anything that may be of some help to you.

Hoshizaki... | Answered on Nov 19, 2018


any beeping? beeping says what problem it is having.
Reset it while energyzed by pushing the button way back of the control board in the control panel section.
The switch needs to be set to run and valve to normal position, full ice bin sensor may be stuck to full position, exercise the sensor flap.
Post what you tried to remedy the situation for better help ideas. Trouble shooting instruction are included on the machine cover doors.

Hoshizaki... | Answered on Aug 23, 2018


http://www.hoshizaki.com/docs/manuals/IM-130_132_210_212_serv.pdf
this web site from Hoshizaki does not show or indicate any wire for heating. See sequence on page 10. You may want to read thru this as this may help you understand how it works and what you may need to address. Let me know if I can be of any further help.

Hoshizaki... | Answered on Jul 06, 2018


this is a large misconception of this unit. After a defrost cycle is completed, the display stays in "DEF" or "REC" until the box temp reaches 14 degrees of the "set" temp. So, if you have it set on zero, the conditioned space has to get to 14 degrees and then the display will switch over and show the temp. One way to verify this, is if the display shows DEF, check to see if the compressor is running, if so, then this scenario applies.

Hoshizaki... | Answered on Jan 26, 2018


It appears that you have supplied the ice bin model number and not the ice maker numbers. Please double check your unit and see if you can locate those numbers.

Hoshizaki... | Answered on Dec 17, 2017


hoshizaki ice maker kml 400 mae is not making enough ice after i cleaned it.

Hoshizaki... | Answered on Dec 17, 2017


When first turned on, the sump should fill with water. If it does, water solenoid is good. If you have a full sump, and no water pump running, sometimes the "Ice/Off/Wash" switch is bad. Put switch in wash, if pump runs, it's good. Now put in Ice position, if sump fills and pump does not come on and compressor indicates it is in the freeze cycle, replace that switch first. Simplest place to start and lest costly to fix.

Hoshizaki... | Answered on Oct 05, 2017


There is a "Dump Valve" that is stuck or has trash in it. Follow the small tube from the pump to the white plastic valve that looks kinda triangular with 3 screws. Remove the screw carefully as this is spring loaded. There should be a black rubber piece that is a seal. Pay attention to how it assembles. The spring presses the seal against an opening. Look for something that may be allowing this not to seat.

Hoshizaki... | Answered on Oct 01, 2017


Try Googling (Hoshizaki)(km320mwh)(manual) without parens.

Hoshizaki... | Answered on Sep 12, 2017


The machine, all in one, not indoor/outdoor split type, will make beeping sound when something is wrong and stops working until it is turned off and turned back on. Some times the machine needs to be reset with the power on, covers removed, reset button inside on electronic mother board.
The ice machine covers have instructions and information on beeping sounds.

Hoshizaki... | Answered on Aug 28, 2017


as long as you recovered the charge, pulled a vacuum, changed the filter/dryer, and added the correct amount of refrigerant as a liquid, you should be good to go.

Hoshizaki... | Answered on Jul 07, 2017

Not finding what you are looking for?
Hoshizaki Logo

373 questions posted

Ask a Question

Usually answered in minutes!

Top Hoshizaki Freezers Experts

Dennis Boxerman

Level 3 Expert

1300 Answers

Joe Palazola

Level 2 Expert

124 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Are you a Hoshizaki Freezer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...