Intex Pool & Spa - Recent Questions, Troubleshooting & Support


if going on and off check pump motor if hot replace

Intex Pool & Spa | Answered on Jan 18, 2020


En https://www.mahico.com/cerrajeros-barcelona/ trabajamos las 24 horas del d?a, los 365 d?as del a?o, ofrecemos servicios de emergencia de cerrajer?a que necesite. Si necesita abrir una puerta, cambiar una cerradura, abrir una caja fuerte de emergencia o necesita realizar un amaestramiento de llaves nos puede llamar de inmediato a la hora que sea. Nuestros servicios est?n garantizados, trabajamos para satisfacer a nuestros clientes y que queden felices con el resultado.

Intex Pool & Spa | Answered on Jan 16, 2020


Unplug the unit. The E90 code on the intex spa is due to a dirty water flow sensor. Remove the control panel and all the screw holding the casing on. In the white plastic piece on the discharge, top hose, you will see a silver nut with a black wire coming from it. That's the sensor. The black wire is plugged into a white wire, carefully unplug it and unscrew the sensor. Clean it good and blow out the hole it goes in. This will fix the code and you will be back in business!

Intex 10x30"... | Answered on Jan 01, 2020


Not sure what you mean by 'the balloon'?

The reason you remove water is because water expands when it freezes. If anything was 'deflated' with water in it, then when the water froze, it wouldn't hurt it.

One thing you can also do, it add ethylene glycol antifreeze to the place where the water is. Use it undiluted from an auto-shop. You can also put some into your filter.

https://inflatablehottubsreviews.com/how-to-pack-away-your-inflatable-hot-tub/

Intex Pool & Spa | Answered on Nov 10, 2019


Pump is ng and needs replacement. Take it back if under warranty.

Intex Pool & Spa | Answered on Oct 13, 2019


It means low salt level (below 2500 ppm). If E91 is shown do the following: 1) Test the salt level with a salt test kit. If a salt test kit is not available you can take a sample of the pool water to your local pool supply store.

Intex Pool & Spa | Answered on Sep 22, 2019


I would suggest that you keep your salt level around 2,5 for chlorination, however to get the green pool sorted your pool needs to be shocked and would recommenced to get your pool's free chlorine level at least up to around 5 in order to shock the pool as normal free chlorine level should be 3

Intex Pool & Spa | Answered on Sep 16, 2019


Hi my Intex hot tub spa is throwing an E90 code every time I try to turn on the filter and heating. What do I need to do to fix this?

Intex Pool & Spa | Answered on Sep 09, 2019


A late answer but it might help future Intex impleller sufferers... they do not sell replacement parts and you won't find any impellers sold separately anywhere on the planet. I've had 1 Intex pool and 3 Intex filter pumps in 3 years. Last week the 3rd pump's impeller broke as well. I shan't buy their products again.

Intex Krystal... | Answered on Sep 02, 2019


The E90 code on the Intex spa is due to a dirty water flow sensor. ... The black wire is plugged into a white wire, carefully unplug it and unscrew the sensor. Clean it good and blow out the hole it goes in. This will fix the code and you will be back in business https://www.justanswer.com/pool-and-spa/ap9qh-i-m-having-error-code-90-intex-hot-tub-intex.html

Intex Pool & Spa | Answered on Aug 18, 2019


basically no use, unless you are setting it up and need to refer to a setting chart to insure it is reading in a specific range.

Intex Pool & Spa | Answered on Aug 17, 2019


My bubbles button and filter button were not working. The two buttons got a little corroded inside the control panel. I sprayed a little deoxit contact cleaner spray on the board by the buttons and worked like charm!

Intex Pool & Spa | Answered on Aug 05, 2019


Use a brass rod 1/8" dia x 2 7/8" long. Plastic welding will not work as stated above. The original impeller shaft ceramic.

Intex Pool & Spa | Answered on Jul 26, 2019


see if oring ok if none use Teflon tape or filter lube

Intex Pool & Spa | Answered on Jul 25, 2019


test gfi plug ---if its a spa most likely pump ceramic shaft broke How to repair Intex PureSpa pump E90 Error 90

Intex Pool & Spa | Answered on Jul 12, 2019

Not finding what you are looking for?
Intex Logo

2,482 questions posted

Ask a Question

Usually answered in minutes!

Top Intex Pool & Spa Experts

Mike

Level 3 Expert

4367 Answers

US Parts Center
US Parts Center

Level 3 Expert

719 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you an Intex Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...