Janome Sewing Machines - Page 6 - Answered Questions & Fixed Issues


Google Janome Customer Service.

...

Janome Sewing... | Answered on Feb 15, 2019 | 121 views


WELL THAT IS WHAT I WOULD DO THEN IF IT DOESN'T WORK THEN CALL THE TOLL FREE NUMBER THEY LIST FOR TECH SUPPORT .

Janome Sewing... | Answered on Feb 14, 2019 | 41 views


Try is:

https://www.janome.com/siteassets/support/manuals/retired/other-models/419s.pdf

Manual is available from Janome. It's on page 13 of the manual or 15 of the pdf.

Janome Sewing... | Answered on Feb 13, 2019 | 53 views


I don't know your experience with this machine so bear in mind.

Your "grinding" could be the machines internal slip clutch, but just guessing. Likely you can't make needle move up/down with handwheel or make a full or multiple turns of handweel ?

If yes, then check the bobbin area (hook and race) is not fouled with thread and/or fabric.

If bobbin area is clear, then try changing the stitch selector to see if its jammed as well.

What type of sewing were you doing when this occured?

Comment here and I'll assist further if need be.

Janome Sewing... | Answered on Feb 13, 2019 | 34 views


Do you have the setting on zigzag? You can check this site to make sure you are placing the needle in correctly. https://www.manualslib.com/manual/514817/Janome-1600p-Series.html?page=16

I hope this helps.

Janome Sewing... | Answered on Feb 13, 2019 | 35 views


Hello Pat

Refer to this link
http://www.alkosewing.com/thread-chart.asp

to convert between Madeira and Janome embroidery thread. My experience so far is: Isacord conversion charts are very scant and provide a number of possible thread colour option for a particular thread colour of another brand.

Hopefully this chart will be a good start for your purpose.

Happy stitching
Sewingirl/

Janome Sewing... | Answered on Feb 09, 2019 | 81 views


Remove the top cover by taking the two large screws and the small one under the handle, LHS.

Remove the left side cover. The hidden screw is a 2.5mm allen accessed through the vent.

Lay the machine on its back and remove the four large phillips screws on the bottom and the small screw for the side, paying extreme caution with respect to the embroidery arm.

CAREFULLY move the bottom to the left and out of the way.

Inside the body of the machine you will see a black box held in place by three or torx/slotted screws. Remove the screws and, as you slowly pull the box out MAKE NOTE OF WHICH WIRES PLUG IN WHERE.



Janome Memory... | Answered on Feb 07, 2019 | 1,688 views


do it repair

Janome Sewing... | Answered on Feb 05, 2019 | 45 views


If your looking for the instructions see pp 28-33 in following manual https://www.manualslib.com/download/1022979/Janome-Me-4023.html If you need specific answer, I can try to help. Please comment here.

Janome Sewing... | Answered on Feb 01, 2019 | 49 views


It wont turn either direction, not a smidgen? Did it jam while sewing? Can you remove bobbin? Will foot move up/down?

Janome Sewing... | Answered on Feb 01, 2019 | 87 views


There several New Home models, can you identify the model number?

Janome Sewing... | Answered on Feb 01, 2019 | 163 views


Please check handwheel clutch engaged (in) and bobbin winding spindle disengaged (all the way to the left).

Janome Sewing... | Answered on Jan 31, 2019 | 50 views


I didn't find a 360 (free), but a 344 appears to be nearly identical. The only notable difference I see is the orientation of tension control selector. Everything else looks the same.

Download from Janome website;
https://www.janome.com/siteassets/support/manuals/retired/other-models/inst-book-344.pdf

Janome Sewing... | Answered on Jan 31, 2019 | 54 views


Make sure top tension is correct for the thread and material. Make sure that the bobbin is wound correctly. Not more than 80% thread. Make sure needle is threaded correctly and the needle is pushed all the way up, flat side at back. I have been sewing for years and I sometimes have not threaded my needle correctly so it?s easily done. :-)

Janome Sewing... | Answered on Jan 31, 2019 | 58 views


I'm not sure how free motion plays into tension. If you were just sewing regular way with an all purpose foot and feed dogs, what you've described is extreme low top thread tension, regardless of tension selector setting. It's not zero tension as that tends to ball up underside of fabric and break the top thread.

Suggest switching back to an all purpose foot and dogs up, dont rethread or change bobbin or needle. Using scrap of same or similar fabric, see if you can get it to tension correctly with a simple straight stitch.

I suspect its a bobbin tension issue but they're extremely rare.

Please comment here with results.

Janome Sewing... | Answered on Jan 30, 2019 | 66 views


I've found the manual for sale on line. One source is https://www.sewingpartsonline.com/instruction-book-janome-and-newhome-532.aspx . Unfortunately, I don't see an option to download the manual from Janome's support site.

I hope this helps.

Cindy Wells

Janome Sewing... | Answered on Jan 29, 2019 | 185 views


Google (janome)(23L)(manual) without parens.

Janome Sewing... | Answered on Jan 29, 2019 | 64 views

Not finding what you are looking for?
Janome Logo

Ask a Question

Usually answered in minutes!

Top Janome Sewing Machines Experts

Douglas Plant
Douglas Plant

Level 2 Expert

222 Answers

Irene Tulloch

Level 2 Expert

498 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a Janome Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...