John Deere Logo

John Deere Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 492 Products
  • 29K Answers
  • 722K Views

https://www.bobcatmanualonline.com/downloads/john-deere-chainsaws-cs36-cs40-cs46-cs52-cs56-cs62-cs71-cs81-service-repair-manual

https://www.green-parts-direct.com/john-deere-parts-diagrams/john-deere-cs36-cs36le-cs40-cs40le-cs46-cs52-cs56-cs62-cs71-cs81-chain-saws-pc2847-carburetor-air-filter-cs46/AD-4275-34517-432112

John Deere... | Answered on Jan 16, 2020


Black smoke means iots getting too much fuel. This would cause lack of power as well. Check your choke as well as your carburetor.

John Deere... | Answered on Jan 12, 2020


http://www.reliancepowerparts.com/catalog/documents/tech-tips/torque-and-rebuild-specs/tr-jd-6068-PT-TSI.pdf

John Deere... | Answered on Jan 11, 2020


To help you we really need to know what kind of generator,or at least the type and age of the motor.

John Deere 4020... | Answered on Jan 03, 2020


Multiple fuel filters. One inside tank and an external. Check fuel flow and volume (pressure) at the injectors.

John Deere... | Answered on Dec 31, 2019


Try adjusting the linkage on the shifter the shifter may not be adjusted properly so the gears are not being fully engaged ,extend the linkage at least an inch or two (lengthen it)

John Deere 2006... | Answered on Dec 29, 2019


If its an over head cam engine then yes you would have to do the valve timing, if its a push rod engine then no you do not.

John Deere... | Answered on Dec 24, 2019


Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.
Best Manuals

John Deere... | Answered on Dec 22, 2019


I'm working on z225 now the fuel pump gets the its vacuum from the crank case for it to pump gas these have a crank case breath hose under the mag to keep it from building up pressure let's the motor breath if this is stopped up it will pull the air it needs through the valve breath hose that runs to the crab while letting the mother breath its not as big as the crank case breathing hose and builds up pressure and pushes oil into the fuel pump pull the crank case hose off and check for oil if thiers oil in it check under the mag fine dirt grass gets under their i hope this helps

John Deere... | Answered on Dec 14, 2019


1945: 542700
1946: 555334

Tractordata.com

Shows year of mfg as 1945.

John Deere... | Answered on Dec 02, 2019


The oil inside for the reverser is good? You found that the oil level was correct, the fluid was clean and no further actions were needed? Usually the failure is the clutch pack but that is seen in the fluid. Can you feel or notice that the shift lever is moving into the gear selection correctly? Do you notice, feel or hear that reverse gear is engaged when selected. Do you hear any noises or sounds that weren't there before the failure? Did this failure happen out of the blue or have you noticed reverse acting up for a while now? Please let me know. Good luck.

John Deere... | Answered on Dec 02, 2019


Order the service manual from John Deere.

John Deere... | Answered on Nov 30, 2019


Request the diagram from John Deere.

John Deere... | Answered on Nov 30, 2019


Request a starter wiring diagram from John Deere.

John Deere... | Answered on Nov 30, 2019

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top John Deere Experts

john h

Level 3 Expert

22486 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Brad Brown

Level 3 Expert

18157 Answers

Are you a John Deere Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...