JVC Car Audio & Video - Page 5 - Recent Questions, Troubleshooting & Support

You're stuck in DEMO mode. When you see stereo's on display at a store it is set to a DEMO mode that cycles through colors, functions, etc so that potential customers can see the different aspects of the unit. To get it to stop changing colors you'll have to go into the menu and turn DEMO OFF.

JVC AM FM CD DET... | Answered on Feb 19, 2019

Get the harness for your car. Any local stereo shop will have it. Also pick up the dash mounting kit. It will have the instructions to take your dash apart.

JVC KD-G230 CD... | Answered on Feb 17, 2019

Should go into illumination options in menu

JVC Car Audio &... | Answered on Feb 10, 2019

JVC KD s39 how do I change the color

JVC Car Audio &... | Answered on Feb 07, 2019

Try going you YouTube and input you brand and numbers you should get your answer

JVC KD-R400 | Answered on Feb 06, 2019

I got this free Pdf manual from an online store for free and I don't think Ive visited a mechanic or fixya for help for more than 3-4 times out of the all the times I fixed the chipper in these 4 years

JVC Car Audio &... | Answered on Jan 30, 2019

Did you ever find a fix for this? This is happening to me as well...thanks!

JVC AM FM CD DET... | Answered on Jan 18, 2019

I had the same problem , you have to reset the stereo , what you have to do is take your faceplate off , there is a little hole that says reset press it with a little pin for about 10 seconds and then put it back it should work now... let me know if works

JVC Car Audio &... | Answered on Jan 14, 2019

JVC KD-DV7302 Head Unit
Need help the face was stolen of this unit n I'm trying everything I can to find a face for it...

JVC Car Audio &... | Answered on Dec 30, 2018

press the display button, until the desired screen comes on, and make sure handbrake wire is earthed.

JVC KW-AVX810... | Answered on Dec 28, 2018

When you switched the constant power and ignition signal wires, did it shut off while driving? I see you said it was wired correctly but It sound like a poor connection on one of those wires. Will the head unit turn back on again after shutting off while you’re driving?

Check back at the wire harness adapter and look at the connector pins. Make sure they’re all seated correctly and do the same at the head unit. If the factory radio never had this problem then it’s most likely what was recently added, harness adapter or connector pins/ crimped connection from pin to wire.

JVC Car Audio &... | Answered on Dec 20, 2018

Try this, tune to the desired radio station and holdpress the station number ( 1-6) for a while, it should blink twice to confirm its storage.

JVC AM FM CD DET... | Answered on Dec 12, 2018

If you are trying to watch a dvd while driving (which you shouldn't) and without setting your parking brake then you'll need to ground the parking brake wire in the harness for your head unit.

JVC Car Audio &... | Answered on Dec 12, 2018

yes, if your Jvc has a Bluetooth capabilities. You can ask a vendor that sells phone to car stereo receiver. By the way, I will not trust a phone to car stereo cable connector. Most of them doesn't work

JVC Car Audio &... | Answered on Dec 03, 2018

Not finding what you are looking for?
JVC Logo

4,865 questions posted

Ask a Question

Usually answered in minutes!

Top JVC Car Audio & Video Experts

Dalynn Turner

Level 2 Expert

346 Answers


Level 3 Expert

85222 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a JVC Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides