Krups Logo

Krups Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 528 Products
  • 5K Answers

You need to ask a better question that includes the model number and exactly what program or part of the program you have issues with.

Krups Coffee... | Answered on Aug 21, 2019

what is your modle sir

Krups Coffee... | Answered on Aug 20, 2019

I have just had the same problem with my Krups XP7240 and I discovered (quite by accident!) that it was the magnetic float inside the water tank which was causing it. I think the float must have let some water in and always stayed on the bottom even when the tank was full. As the float was in an enclosed plastic column it was a bit hard to access, but through sheer desperation I snapped a plastic fork in half and wedged the handle section under the float to keep it off the bottom and this works nicely. It is not professional by any means but I was quite pleased with my innovation :)

The only down side to this 'method' is that the opposite is now true and when the tank is empty it doesn't register so you would really have to keep an eye on the water level to avoid killing the element completely.

I would imagine that the only professional way to get this sorted out is to replace the tank (or float if it is accessible?). Good luck!!

Krups Small... | Answered on Jul 16, 2019

Google (krups)(203)(manual) without parens. You may have to refine your search to get the correct model.

Krups Coffee... | Answered on Jul 13, 2019

It's pretty simple when you know how.
Yeh, it's a very cheap Grinder to replace (£30) but when you can buy a pair of burr plates at £8 which includes p&p, it's worth the 40 minute fix, even if for curiosity and satisfaction!

Krups GVX2-12... | Answered on Jul 10, 2019

Maybe Krups can provide the diagram if you inquire.

Krups FBC412... | Answered on Jun 28, 2019

You can only get that wheel as part of the grinder, it is not possible to remove the burr to replace the plastic part. It's factory fit during manufacture. There are 2 reasons I'm aware of to cause that, rarely it can be a stone in the beans but more likely you have an internal leak causing the grounds to bind up together from the steamy environment within the housings. Also if the relief valve in the distributor is sticking it can cause the chamber to stay very wet.

Krups Coffee... | Answered on Jun 28, 2019

my krup ice cream.maker container is not freezing because of empty what to do?

Krups 358-70 La... | Answered on Jun 17, 2019

Yes, they stop working sometimes. Same thing happened to me.
The Cuisinart ICE-20 bowl is precisely the same, and works with the Krups 337. You can buy the Cuisinart bowl separately. It costs nearly as much as the whole machine, but what can you do.

Krups 358-70 La... | Answered on Jun 17, 2019

You need to specify model, they are not all the same.

Krups Small... | Answered on Jun 17, 2019

Error 12 There was no pulse from the ejection switch so possibly a switch problem or worse still some grief on the control PCB. This will also be associated with the cleaning the drawer problem. From memory the switch/es are located above the used grounds bin.

Krups Coffee... | Answered on May 07, 2019

my dear sir it looks that you had some internal leaking .due to this the water went on to the electric parts . now you need to fest dry it properly then plug it in again and make sure it doesn't leak again if not check there is two thermal fuse on the ac supply sow make sure you unplug first see that you do the same as type if this get blown again then you have to change the pcb

Krups Coffee... | Answered on Apr 08, 2019

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Krups Experts


Level 3 Expert

85216 Answers

JonSnell Electronic
JonSnell Electronic

Level 3 Expert

30692 Answers

Tom Chichester

Level 3 Expert

54853 Answers

Are you a Krups Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides