Krups Logo

Krups Popular Questions, Answers, Tips & Manuals

Do you work here? Claim your company

  • 528 Products
  • 5K Answers
  • 357K Views

That model had a likelihood of the electrovalve growing a green crystal inside the fitting where the teflon tube comes from the boiler. The electrovalve is a solenoid operated tap on the steam wand side accessed by removing the lid and the side cover. I used to take the electrovalve off completely to do the job. To get the teflon tube out you depress the silver collar around the tube towards the fitting and pull on the tube. It won't come out unless you depress the collar. You then unscrew that same fitting and clear the green crystal out with a probe or screwdriver and rinse or blow the fitting out. The fitting was sealed from new into the electrovalve with some sort of sealant product, I used to clean out the threads and use some thread tape, I never had a leak and did heaps of them over the years.

Krups Coffee... | 54 views | 1 helpful votes


I found this on the internet:

Try this, remove the tank, the drip tray, the bin on the side and the sliding thing above the bin. Hold down the on and steam buttons while plugging the machine into a live socket, it's either that or the same again but holding down the on button and the program button while plugging it in. You will get a screen that says something like " Remis a something vende" which is French for put it into sale state, you choose "Oui" for yes

Krups Coffee... | 39 views | 0 helpful votes


Google (krups)(171)(manual) without parens OR contact Krups directly to request it.

Krups Coffee... | 28 views | 0 helpful votes


Found on the internet:

Try this, remove the tank, the drip tray, the bin on the side and the sliding thing above the bin. Hold down the on and steam buttons while plugging the machine into a live socket, it's either that or the same again but holding down the on button and the program button while plugging it in. You will get a screen that says something like " Remis a something vende" which is French for put it into sale state, you choose "Oui" for yes Hope this helps

Krups Coffee... | 28 views | 0 helpful votes


Repair may consist of replacement. Leaking underneath is not a good indication.

Krups Coffee... | 89 views | 0 helpful votes


You need to ask a better question that includes the model number and exactly what program or part of the program you have issues with.

Krups Coffee... | 60 views | 0 helpful votes


Google (krups)(203)(manual) without parens. You may have to refine your search to get the correct model.

Krups Coffee... | 51 views | 0 helpful votes


You can only get that wheel as part of the grinder, it is not possible to remove the burr to replace the plastic part. It's factory fit during manufacture. There are 2 reasons I'm aware of to cause that, rarely it can be a stone in the beans but more likely you have an internal leak causing the grounds to bind up together from the steamy environment within the housings. Also if the relief valve in the distributor is sticking it can cause the chamber to stay very wet.

Krups Coffee... | 69 views | 0 helpful votes


Hi u can order you're parts at this site :::
cheers www.ereplacementparts.com
img_20190406_192935-0bgd55j1nlmdu141lrx51krz-2-0.jpg

img_20190406_192439-0bgd55j1nlmdu141lrx51krz-2-2.jpg

Krups Blenders | 84 views | 0 helpful votes


Error 12 There was no pulse from the ejection switch so possibly a switch problem or worse still some grief on the control PCB. This will also be associated with the cleaning the drawer problem. From memory the switch/es are located above the used grounds bin.

Krups Coffee... | 114 views | 0 helpful votes

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Krups Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

JonSnell Electronic
JonSnell Electronic

Level 3 Expert

30690 Answers

Tom Chichester

Level 3 Expert

54849 Answers

Are you a Krups Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...