Krups Logo

Krups Answered Questions & Fixed Issues

Do you work here? Claim your company

  • 528 Products
  • 5K Answers
  • 357K Views

Hi! Did You fixed the problem? I got same error and have no idea whats the point :(

Krups Coffee... | Answered Yesterday | 45 views


Found on the internet:

Try this, remove the tank, the drip tray, the bin on the side and the sliding thing above the bin. Hold down the on and steam buttons while plugging the machine into a live socket, it's either that or the same again but holding down the on button and the program button while plugging it in. You will get a screen that says something like " Remis a something vende" which is French for put it into sale state, you choose "Oui" for yes Hope this helps

Krups Coffee... | Answered on Oct 30, 2019 | 55 views


I found this on the internet:

Try this, remove the tank, the drip tray, the bin on the side and the sliding thing above the bin. Hold down the on and steam buttons while plugging the machine into a live socket, it's either that or the same again but holding down the on button and the program button while plugging it in. You will get a screen that says something like " Remis a something vende" which is French for put it into sale state, you choose "Oui" for yes

Krups Coffee... | Answered on Oct 30, 2019 | 85 views


Google (krups)(171)(manual) without parens OR contact Krups directly to request it.

Krups Coffee... | Answered on Oct 26, 2019 | 53 views


That model had a likelihood of the electrovalve growing a green crystal inside the fitting where the teflon tube comes from the boiler. The electrovalve is a solenoid operated tap on the steam wand side accessed by removing the lid and the side cover. I used to take the electrovalve off completely to do the job. To get the teflon tube out you depress the silver collar around the tube towards the fitting and pull on the tube. It won't come out unless you depress the collar. You then unscrew that same fitting and clear the green crystal out with a probe or screwdriver and rinse or blow the fitting out. The fitting was sealed from new into the electrovalve with some sort of sealant product, I used to clean out the threads and use some thread tape, I never had a leak and did heaps of them over the years.

Krups Coffee... | Answered on Nov 07, 2019 | 71 views


Repair may consist of replacement. Leaking underneath is not a good indication.

Krups Coffee... | Answered on Aug 26, 2019 | 123 views


You need to ask a better question that includes the model number and exactly what program or part of the program you have issues with.

Krups Coffee... | Answered on Aug 21, 2019 | 79 views


what is your modle sir

Krups Coffee... | Answered on Aug 20, 2019 | 3,294 views


Google (krups)(203)(manual) without parens. You may have to refine your search to get the correct model.

Krups Coffee... | Answered on Jul 13, 2019 | 70 views


It's pretty simple when you know how.
Yeh, it's a very cheap Grinder to replace (£30) but when you can buy a pair of burr plates at £8 which includes p&p, it's worth the 40 minute fix, even if for curiosity and satisfaction!
7_10_2019_8_34_40_pm.jpg

Krups GVX2-12... | Answered on Jul 10, 2019 | 517 views


You can only get that wheel as part of the grinder, it is not possible to remove the burr to replace the plastic part. It's factory fit during manufacture. There are 2 reasons I'm aware of to cause that, rarely it can be a stone in the beans but more likely you have an internal leak causing the grounds to bind up together from the steamy environment within the housings. Also if the relief valve in the distributor is sticking it can cause the chamber to stay very wet.

Krups Coffee... | Answered on Jun 28, 2019 | 88 views

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Krups Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

JonSnell Electronic
JonSnell Electronic

Level 3 Expert

30806 Answers

Tom Chichester

Level 3 Expert

55370 Answers

Are you a Krups Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...