NetGear WG - Recent Questions, Troubleshooting & Support


Dear Customer,

Yes It will happen,cause of protocols handling on router with your main pc,

SO,try to use another higher configured pc or you can use server like pc,

Never try to handle router on lower configured pc ,its affect on you r work ,its defanetly very slow-down you work,

SO try my solution you will get more speed,

THNX

NetGear : WG111... | Answered on Apr 07, 2019


The password has to be included when the device is requesting this. Should be printed on the dwvice somewhere.look around for it or try a hardline hookup then change the password.

NetGear - WG311... | Answered on Jan 04, 2018


Hi

Go to
https://www.netgear.com/support/download/

type in WG111 ( v2 will show up)

select Software Version 4.0.0 for Windows

on right hand side right below and you will be fine

Good Luck

NetGear : WG111... | Answered on Dec 28, 2017


Try doing a network reset this may help or reset your router/modem and also try restarting your computer to see if this may help

NetGear WG111... | Answered on Dec 19, 2017


You may have lost service. Call NetGear and see if they can resolve the problem thru the connection. If it is under warranty, they should be able to replace it. Good luck.

NetGear WG511T... | Answered on Dec 10, 2017


Right-click on the Wi-fi icon in the bottom right corner of your computer display and select "Troubleshoot problems". Wait while the Windows Network Troubleshooter tries to identify and fix the problem.

NetGear WG111T... | Answered on Nov 27, 2017


Jon, i would try reinstall the drivers for the adapter. if that does not work try to find an older version of the driver.

NetGear WG111... | Answered on Nov 14, 2017


HI! this is Alex Walker expert to fix this issue for you call +1(518)348-9393 Thank You

NetGear WG111V2... | Answered on Jul 03, 2017


Call your ISP and have them reset/clear the connection. It sounds like your MAC address is locked and they can correct that.

NetGear : WG111... | Answered on Jun 07, 2017


You dont need your wireless adapter to setup your laptop however if you are going to setup or use your laptop to connect to a wireless connection you need your wireless adapter

NetGear... | Answered on Apr 22, 2017


Wi if is the slowest form of connection and is shared with other devices. If you want good bandwidth you need to connect via ethernet cable directly to the router.
Examlpe... wi if 4 meg shared, Ethernet 100 meg..
good luck !

NetGear WG311... | Answered on Mar 30, 2017


I cant help sorry

NetGear : WG111... | Answered on Mar 29, 2017


Soo what does MIL computer device manager say?

NetGear WG111T... | Answered on Feb 27, 2017


Hi, Follow the steps below to configure the wireless adapter settings on the XP system:

1. Right click on My Computer icon and go to Manage.
2. Go to Services then go to Service and Applications.
3. Double click on Wireless Zero Configuration.
4. Change the Start Up Type to Automatic and click on Apply
5. Click on Start and press OK to close the window.
6. Go to 'Control Panel', Click on Classic View in the left hand side menu and then open 'Network Connections'.
7. Right-click on the wireless Network Connection icon and select 'Properties'.
8. Go to the 'Wireless Networks' tab .
9. Check the option 'Use Windows to Configure this Wireless Connection' and click 'OK'.

Now please perform the following instructions to connect to the wireless network:

1. Go to 'Control Panel', Click on Classic View in the left hand side menu and then open 'Network Connections'.
2. Right-click on the wireless Network Connection icon and select 'Properties'.
3. Click on the 'wireless network' tab.
4. Under Preferred networks if you see any name in the list then highlight the name and click remove. Click OK.
5. Right-click on the wireless Network Connection icon and select 'View Available Networks'.
6. Look for the SSID (aka Network Name) of the Wireless router or access point.
4. Highlight thee SSID from the list that you want to connect to.
5. Type the security Key here and click on the 'Connect' button.
6. You should have successfully established a wireless network connection.

I hope this information allows you to resolve this issue.

If I have helped you, please help me, and rate this suggestion with the highest FixYa rating. If you cannot rate this post with the highest rating, then please comment to this post and I will try to help you further.

Regards
Anand

NetGear WG111... | Answered on Dec 05, 2016


This means the DHCP service is not enabled on the wireless router.

either enable the DHCP service on the wireless router

or

Give a static IP onto your wireless NIC card ( Netgear N150 Wireless usb adapter )

NetGear : WG111... | Answered on Jan 21, 2016


please download latest driver from following link and install in computer

http://kb.netgear.com/app/answers/detail/a_id/12520

NetGear : WG111... | Answered on Dec 02, 2015


Download the latest software (version 2) from Netgear which contains the drivers for Windows 7. They are not included in Windows 7 by default.

Welcome to the new NETGEAR Download Center

And enter the WG111 in the search box.

and download the manual and software.

NetGear WG111... | Answered on Mar 08, 2015

Not finding what you are looking for?

-96 questions posted

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Mike

Level 3 Expert

4363 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

NetGear Computers & Internet

  • Forum

View Most Popular

  • NetGear Computers & Internet
Loading...