Prestige Appliances Vehicle Parts & Accessories - Recent Questions, Troubleshooting & Support


Hi there's this website something like r eliable-store and it is very amazing for manual for repairing servicing anything
someone on fixya recommended it to me and I thank him even today
They have full manuals and it's verrrrry cheap and mine
I got free in offers
3rd time I also had an issue with the file so the girl replaced it in 30 mins
there is one more but i don't remember its name it was 2 years back bitman something link this
Try it out brother

Audiovox... | Answered on Jan 31, 2019


Hi there's this website something like reliable-store and it is very amazing for manual for repairing servicing anything
someone on fixya recommended it to me and I thank him even today
They have full manuals and it's verrrrry cheap and mine
I got free in offers
3rd time I also had an issue with
the file so the girl replaced it in 30 mins
there is one more but i don't remember its name it was 2 years back bitman something link this
Try it out brother

Prestige... | Answered on Jan 22, 2019


There's a website that has all this information about all this and manuals everything totally free there are many actually but I personally like few .. let me know if u need help
thanks

Audiovox... | Answered on Jan 21, 2019


The valet switch,on the newer Prestige alarms, is a push button LED or, it's incorporated into the antenna. In both cases, turn the key to the on position, then press and release the valet switch. The alarm will respond with two chirps confirming that it is disarmed. You may now start the vehicle. After you successfully disarmed the alarm, turn the key to on position, press and hold the valet switch for approximately 5 seconds, the LED will come on solid. Turn the key off.The alarm is now in valet. You can take it out of valet in the same manner.

Audiovox... | Answered on Dec 08, 2017


i would think the button is activating the fob, or when you put new battery in is it the right way or you may have pushed something inside and its come lose off the board, it would need opening up and having a look, and testing the switch.

Audiovox... | Answered on Jun 10, 2017


I would either go to the website for the manufacturer of the keyfob and search the troubleshooting section or get the company phone number and call them and get instructions for the programming codes. good luck.

Audiovox... | Answered on Apr 21, 2014


check starter and starting system

Prestige... | Answered on Jan 16, 2014


Provided that your system is not programmed for coded override, the standard emergency override is as follows:

1. Enter the vehicle (the security system will trigger.)
2. Locate but do not press the valet/override switch yet (it should be a small black button installed under the dash within reach of the driver)
3. Turn the ignition key to the ON position.
4. Press and release the emergency override button (The security system will turn off).
Note: If the automatic arming feature is enabled on your system. The security system will re-arm the next time the ignition key is turn off and the vehicle's doors are closed.


If the coded override feature was enabled by the installing dealer, you will need to follow these procedure:

1. Enter the vehicle (the security system will trigger).
2. Locate but do not press the valet/override switch yet (it should be a small black button installed under the dash within reach of the driver)
3. Turn the ignition switch to the ON position.
4. Within 5 seconds press the emergency override button the number of times corresponding to the first digit of your personal code (Default digit is 1).
5. Within 5 seconds turn the ignition key OFF, then ON.
6. Within 5 seconds press the emergency override button the number of times corresponding to the second digit of your personal code (Default digit is 1).
7. Within 5 seconds turn the ignition key OFF, then ON.
8. If entered correctly the security system will turn off.
9. Turn the ignition key to the OFF position.

If the coded override feature is enabled and the code is lost, the system will need to be reprogrammed by an authorized dealer.

Audiovox... | Answered on Jan 08, 2014


Replace BCM, (body control module).

Audiovox... | Answered on Oct 28, 2013


Make model and year.

Prestige... | Answered on Aug 14, 2013

Not finding what you are looking for?
Prestige Appliances Logo

50 questions posted

Ask a Question

Usually answered in minutes!

Top Prestige Appliances Vehicle Parts & Accessories Experts

Rocguy

Level 3 Expert

373 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Prestige Appliances Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...