Robotoolz Measuring Tools & Sensors - Recent Questions, Troubleshooting & Support

Normal repair of a 9-volt terminal is to salvage the top of a dead 9-volt battery. Do not use a good 9-volt as they are prone to dangerous expansion if shorted. Take the salvaged battery top and add short red and black leads with a soldering gun/pencil. Use rosin core solder only, not acid core or solid. Replace the damaged terminal using above by connecting the short leads to the original terminals or circuit board traces.

Robotoolz... | Answered on Aug 15, 2019

Dropped my robolaser RT7210-1 and the bearings came out.

Robotoolz... | Answered on Oct 26, 2017

Unfortunately no. Nothing you do will make this accurate again. These are throw away lasers.

Robotoolz... | Answered on Oct 26, 2017

I would ask the repair company!

Robotoolz Laser... | Answered on Oct 16, 2017

Try for your needs here

Robotoolz... | Answered on Aug 24, 2016 This would be a professional calibration to many known standards. I hope this helps you out. Thanks for visiting and leave feedback! I'm a newbie

Robotoolz... | Answered on Jul 13, 2016

Bill the level is a pendulum type of device, therefore it is self leveling as long as it is within about 5 degrees of level. The pendulum has a lock for when it is not in use, make sure that you unlock this so the the unit can self level. It also has a flashing out-of-level indicator to warn you if you have not set the unit up within the 5 degrees of actual/real level. Paul.

Robotoolz 5Beam... | Answered on Sep 05, 2015

better batteries,or rebuild

Robotoolz... | Answered on Jul 03, 2015

Not finding what you are looking for?
Robotoolz Logo

131 questions posted

Ask a Question

Usually answered in minutes!

Top Robotoolz Measuring Tools & Sensors Experts


Level 3 Expert

220 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

29709 Answers


Level 3 Expert

5746 Answers

Are you a Robotoolz Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides