Starbucks Coffee Makers & Espresso Machines - Recent Questions, Troubleshooting & Support
MY Saeco italia has been leaking everytime it
it is also possible that the leak came from the pump as well most likely your lines are also clogged up with fine ground coffee past the brewer which stops the water from flowing and causes excess pressure which eventually either busts a water line or makes the pump push the water out past the caseing of the machine. Very time consuming finding the leak as well as replaceing the parts that are broken. If you have any further questions message me back. Thanks
p.s just curious because i ask all customers dealing with coffee and expressor machines what was the grind set to when you ground your coffee?
on Oct 19, 2019
Pods not opening
This is quite common for those machines. Try to not open it completely and push the pod in, until it stops falling any further. then close the lid and you should feel some back pressure while doing so. If not, then plrease bring the machine back to the retailer.
on Jan 15, 2019
Water light can't be reset
I got my machine for Christmas and I have had the same problem almost everyday. Usually wiping down the water supply area worked but not today.. I have spent the past hour and a half trying everything I read online. Finally after reading the gray thing that floats in the water tank was a magnet I decided to maybe try to "reactivate" the magnent/sensor?.? I dumped all the water out and rubbed the magnet up and down the outside of the water tank making the gray block move up and down.. I even rubbed the magnent on the black surface where the water tank goes and the gray thing-e touches when attached.. To my surprise It worked!! It may have been pure coincidence..I dont know..but I figured I'd share anyway..It's worth a try!
on Nov 26, 2018
Timer switch is not working stuck in the on postion
I just had the same problem. It's the knob itself. You have to extract the knob by pulling, gently, and squeezing it out. The plastic housing over the metal thing is cracked. I took some super glue and duct tape and wound it tightly around it and pushed it back it and it works.
on Apr 26, 2018
Not finding what you are looking for?