Uniden Lands Phones - Page 5 - Recent Questions, Troubleshooting & Support


I have a Uniden 5.8 GHz and the message indicator light will not stop flashing. The phone screen says I have a voice mail but I don't. Does anyone know to fix it?

Uniden 5.8GHz... | Answered on Jan 13, 2019


I suspect remote is unable to communicate with the base and is reporting the issue as power loss at base.

So does the base function, makes and receives calls?

Reset the base unit and power supply by unplugging the base power supply from the wall, wait at least 1 minute, plug base power supply back into wall outlet.

Reset remote by removing battery wait a minute, reinstall battery.

If after the reset the base can't make/receive calls, its likely failed.

If the base works and the remote still reports base power issue, could be either base or remote.

The manual is at the following link...

http://www.uniden.info/download/index.cfm?s=D3098

Uniden Lands... | Answered on Jan 10, 2019


What is phone system connected to ?
A land line ?
what sort of diversion ?
unconditional *21{phone number}# #21# to turn off unconditional
no reply / busy ? https://infinititelecommunications.com.au/network-feature-codes/
https://www.telstra.com.au/small-business/online-support/category/bundles/dot/where-can-i-find-a-list-of-feature-access-codes

Uniden Lands... | Answered on Jan 08, 2019


My Uniden manual refers to pressing a [dnd] (do not disturb) key on the base.

Uniden Lands... | Answered on Jan 06, 2019


• You are urged to arrange for periodic performance checks with a
Uniden Marine dealer

Uniden Lands... | Answered on Jan 02, 2019


This info is from page 34 of the operation manual which is available on the internet in pdf format:
•To edit the number, press END/CLEAR. to back up the cursor and delete numbers. Re-enter the correct numbers.

Uniden Lands... | Answered on Jan 02, 2019


not knowing what phone it is make this hard. It will be in the setup menus but most systems will probably be limited to 6.

Uniden Lands... | Answered on Dec 31, 2018


Uh....
Delete old messages would be my 1st try.

Uniden Lands... | Answered on Dec 29, 2018


I'm having the same problem as you are. My screen went blank for no apparent reason. I've been searching for a quick fix solution but I keep comming across asinine answers that has nothing to do with the original problem such as this one. If you find a solution before I do, can you please post it? Thanks in advance!

Uniden DECT 6.0... | Answered on Dec 17, 2018


YOU CAN'T ON LAND LINE PHONES

Uniden Lands... | Answered on Dec 16, 2018


It lets the phone transmit direct ot a hearing aid.

"Turn-On-To-T-coil" - 15 Ways To Get The Most From Your Hearing ...


www.tecear.com/Turn-On-To-T-coil.htm

Jul 24, 2017 - The user's hearing aid or CI must have a manually selectable T-coil .... T-coil for cellphone, cordless phone, desk phone and Skype (VOIP) ... [PDF]

Uniden 3 Handset Cordless Phone Manual

Uniden Lands... | Answered on Dec 11, 2018


check the aerial on the base unit.

If they are close, remove the wall plugs to the handsets and then the base units. Count to 30, plug in the base unit and then the other phones to re-register them.

Uniden Lands... | Answered on Nov 30, 2018


only if it is a base Unit with Message centre. Otherwise any message come from your telco.

Google

make model manual

Uniden Lands... | Answered on Nov 20, 2018

Not finding what you are looking for?
Uniden Logo

10,786 questions posted

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

k24674

Level 3 Expert

8081 Answers

Cindy Wells

Level 3 Expert

6063 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...