Viking Logo

Viking Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 808 Products
  • 6K Answers
  • 379K Views

I believe the stove needs an electricity supply. See if there is a switch somewhere in your kitchen or on your fusebox that may be switched off. The stove switch maybe hidden in a cupboard near the stove or even quite away from it.

Viking Kitchen... | Answered on Oct 09, 2019


Possibly blocked drain from evaporator. When fridge goes into reverse cycle ice melts on evaporator and drains to a dish on the motor housing, this evaporates when motor runs. May have a crack in this dish or drain pipe has a hole or not draining into dish.

Viking... | Answered on Oct 03, 2019


Replacing the magnetic door seal might help, at least for awhile. Before replacing it, check for even sealing around the entire perimeter. Check the "flex" of the seal. Check for foreign matter in or on sealing surfaces. Check hinges for binding or misalignment. Apply some kind of marker (catsup comes to mind) to the entire gasket, close the door and inspect for gaps. Clean up promptly.

Viking... | Answered on Sep 05, 2019


I have seen this before and it goes beyond the seal, if it was the seal, you would see vapor trails around the area where the seal is leaking. You may have a breakdown of foam in the door. How old is it?

Viking 42 in... | Answered on Aug 30, 2019


Try locking washer then lock nut

Viking Washing... | Answered on Aug 24, 2019


We have an over the range GE microwave and my wife was cooking some pasta on the stove and used the vent fan on the microwave to dissipate the steam and when we were done eating she noticed that the steam from the pasta had gotten in between the glass on the microwave door, how can we get rid of this any ideas.

Viking DMOR205SS... | Answered on Aug 17, 2019


There should be a clock setting that allows you to select 12 hr vs. 24 hr. time.

Viking Ovens | Answered on Aug 15, 2019


Good Morning,
We have control boards for this model in our inventory for sale, and we rebuild them. All control boards we sell and repair are fully tested for 100% functionality & come with a two year warranty. We are also able to test the touchpad for this Viking model.
Reach out to us for more information.
512-355-1108
fixyourboard.com

Viking VIPR161... | Answered on Aug 08, 2019


Hi- It sounds like you diagnosed the problem correctly. There is a chance there is something wrong with the board but I would replace the top switch first. They are pretty expensive if I remember correctly and be careful of the wiring colors, the last one I changed had the wire colors reversed but the wire labels were correct. Good luck.

Viking VIPR... | Answered on Aug 08, 2019


We have a Viking VIPR101 30" downdraft ventilator. We've learned that the ON-OFF switch on the side of the ventilator can overheat and burn out when it is held down continuously (poor design). Best to push and quickly release it. First time we had the switch professionally replaced--it's modular and very simple to swap out. Next time we fixed it ourselves with switch part # PV300182 from allvikingparts.com. They had replacement guidance on-line. Hope this is useful.

Viking... | Answered on Aug 08, 2019

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Viking Experts

Tom Chichester

Level 3 Expert

54896 Answers

ray gallant
ray gallant

Level 3 Expert

65416 Answers

Bill Boyd

Level 3 Expert

53755 Answers

Are you a Viking Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...