Whirlpool Dryers - Recent Questions, Troubleshooting & Support


If it has been working and suddenly, have this problem it could very well be the child lock has been activated.

Whirlpool Dryers | Answered on Nov 10, 2019


I have added a link. It explains the 5 most common reasons a dryer won’t start.

Whirlpool Dryers | Answered on Nov 08, 2019


AF on your Cabrio means the Air Flow is being obstructed. Make sure the vent is secure and free of debris at the back of the appliance. Also ensure there is no obstruction where it is vented outside of your home. Lastly, make sure the lint trap is clean. Your dryer will still run normally, but it's best to go through your checklist so no further issues arise.

Whirlpool Cabrio... | Answered on Sep 10, 2019


Your heating element is shorted to ground Replace your heating element

Whirlpool Dryers | Answered on Sep 07, 2019


How to Disable a Dryer's Buzzer
  1. Turn off and unplug the dryer. Since you need to remove the front panels and expose the electrical wiring of the dryer's buzzer you should turn the dryer off and then unplug the machine to avoid shocks. ...
  2. Locate the buzzer. ...
  3. Pull the buzzer's wires. ...
  4. Test the machine.
reference: https://www.hunker.com/13410550/how-to-disable-a-dryers-buzzer

Whirlpool Dryers | Answered on Aug 27, 2019


does your dryer have a dry sensor ? if so try changing the dial to a different setting that doesn't use the sensor, also some models have a separate button to turn off the dry sensor. it is meant to save energy if your clothes are dry before the time you set

Whirlpool Dryers | Answered on Aug 18, 2019


Burrs? Where? Inside the drum? I would use a Dremel Motor Tool with a polishing or buffing wheel.

Whirlpool Dryers | Answered on Aug 18, 2019


Either your mister (mistor? mist-er?) is working overtime, or else your dryer vent is clogged.

Whirlpool Dryers | Answered on Aug 18, 2019


Yes, there are a couple of fuses inside your dryer, but they don't look like normal, common, household or electronic fuses. Usually one fuese will interrupt the heater circuit, while another one will kill power to the whole dryer.

Whirlpool Dryers | Answered on Aug 18, 2019


Should just remove the screws and the lock and flip them over. Generally very easy and quick

Whirlpool Dryers | Answered on Aug 16, 2019


it can be replaced but the new one will look just like in a few weeks anyway. Its just thin sheet steel uncoated and the heat comes right through that vent that is why it looks like that as far as rough edges just use a piece of sand paper or emory board or steel wool and rub it smooth. suff gets caught on the grate and the heat can burn it all the black is lint that melted on it but a new one look just like it in like i said a few weeks but to be safe and make sure its not getting to hot get a thermometer and check the temperature during low heat and high heat drying. low around 135f and high around 160f if it goes up over 170 there is a problem you may want a pro to check the unit.

Whirlpool Dryers | Answered on Jul 15, 2019


Go to www.repairclinic.com and enter the model of your Samsung gas dryer. You will be presented with a list of common repair parts and may be able to view a video showing disassembly of a typical Samsung dryer. You also can get a straight answer regarding replacement.

Whirlpool Dryers | Answered on Jul 11, 2019


Broken belt.

Depending on your level and ability, it's not really very hard to replace. Heres a YouTube video describing how to do this.

https://youtu.be/GzYmoS9brMY

Whirlpool Dryers | Answered on Jul 03, 2019

Not finding what you are looking for?
Whirlpool Logo

12,379 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Dryers Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Ned Halaweh
Ned Halaweh

Level 2 Expert

239 Answers

Are you a Whirlpool Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...