Whirlpool Ovens - Recent Questions, Troubleshooting & Support

possible when moving ignitor broke

Whirlpool Ovens | Answered on Oct 10, 2019

We're sorry to learn of your experience. For further assistance with your Oven, we recommend the link below. You may contact our counterparts in your Region due to you are outside the US.

Whirlpool Ovens | Answered on Oct 01, 2019

From my understanding of modern ovens, it should only lock like that if it's doing it's 'self-clean' cycle. It's possible that the locking module was 'tripped' by the high heat or somehow thought that is what it was instructed to do. If the problem happens again when the oven is set to 400 (and not self clean) it may be a damaged module/sensor

Whirlpool Ovens | Answered on Aug 24, 2019

Hello,This means the control pad is faulty and need to be change.

Whirlpool... | Answered on Aug 07, 2019

This is a common failure of the control board. It is often accompanied by a intermittently blank display. The board is no-longer-available but we can rebuild it for you at www.fixyourboard.com.

Control board part number: 8302967

Whirlpool... | Answered on Aug 07, 2019

If you have a Whirlpool oven, the F2 E6 error means that the Cancel key line is open. You will need to replace the keypad or the keypad and controller board (if a single assembly) if the keypad doesn't respond to a press of the Cancel Key.

I hope this helps.

Cindy Wells

Whirlpool Ovens | Answered on Aug 07, 2019

fiest press the on key see if the display comes if not the turn the power off for 5-8 seconds if that doesnt do it turn power off then pull the oven out from the wall and remove the top to acess eoc pull the mylar ribbion out of the eoc by releasing the latch which is a tiny pullout bar at the base of the connector at the eoc then you cam clean the ribbon gently with a clean pencial eraser also under the top panel will be a tech sheet with more info pay atten to resseting the oven cavity size on start up

Whirlpool... | Answered on Aug 07, 2019

F2-E1 - Touch Pad (Keypad) Cable Unplugged -
Check the connection between the touch pad (keypad) and control board (clock) to make sure it is secure.
Select the 'cancel' function and wait 60 seconds.
If error code reappears then replace the touch pad, or touch pad and control board (clock) if all one assembly.

It appears your timer/clock has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...

FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.

If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.

Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.^^^^^^^^

Whirlpool... | Answered on Aug 07, 2019

I ended up calling a technician to come out and look at it. He said that the front panel where you push all the buttons went out and I would need to get a new panel.

Whirlpool... | Answered on Aug 07, 2019

Oven Repair Tips - My Oven Keeps Beeping - It Is Fixed Appliance ...


Much like a computer, electronic appliances sometimes need to be restarted. To reset your oven, unplug it from the power and leave it unplugged for at least 30 seconds. If the beeping resumes after the oven is plugged back in, it will be necessary to determine the cause of the error code.

My whirlpool oven will not stop beeping! When I press the stop button ...

https://www.justanswer.com > Home Improvement Questions > Appliance Repair

1 answer
Oct 17, 2010 - But when cancel is held down the beeping stops and the display just ... Feb but I think its the original unit from when the house was built (2006).


Whirlpool Ovens | Answered on Jul 19, 2019

Not finding what you are looking for?
Whirlpool Logo

3,581 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Ovens Experts

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Cindy Wells

Level 3 Expert

6048 Answers


Level 3 Expert

85216 Answers

Are you a Whirlpool Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides