Press enter to search.
Douglas Plant posted an answer for this Sewing Machines:
"If you are trying to view the designs on a computer then you need an embroidery software..."
Douglas Plant posted an answer for this Brother Sewing Machines:
"The PC8500 does not do free motion well because of its tension design, it is not you.It..."
Douglas Plant posted an answer for this Janome Sewing Machines:
"In the bottom of the machine is where the reverse mechanism is. There is a cam that slides..."
"I suspect the motor is bad."
Douglas Plant posted an answer for this Kenmore Sewing Machines:
"There is a zig zag gear in the top of the machine that breaks somertimes and thus prevents..."
Douglas Plant posted an answer for this PfaFF Sewing Machines:
"It sounds like the sensor connection where you plug in the buttonhole foot is bad."
"The problems will be the technology, you will have to get a floppy disk for your computer...."
"It may be as simple as the dial is set to buttonholes which makes a short stitch and the..."
"If you are the original owner then you should be able to go to a viking dealer and they..."
"It has to be one of three things...
1-Needle is not inserted all the way up in the..."
Douglas Plant posted an answer for this Singer Sewing Machines:
"It sounds like a mechanical issue, when the machne starts to slow, stop using the control..."
Douglas Plant posted an answer for this Husqvarna Sewing Machines:
"Remove the cover on the left side of the arm and there is a knob that you push to the..."
Douglas Plant posted an answer for this Elna Sewing Machines:
"It sounds like you have a broken can gear, if you have it repaired be sure it is done by..."
"I do not believe that the parts are available now."
"You will need a Mac version of the Viking software."
"It is on the bottom of the machine"
Douglas Plant posted an answer for this New Home Sewing Machines:
"Try removing the cover plate on the bottom of the free arm and cleaning out the lint and..."
"Go to Vikings web site, then software support and you should find the drivers there."
Douglas Plant posted an answer for this Husqvarna Viking Emerald 116 Sewing Machine:
"Try using a Schmetz stretch needle size 11 )7015-HS)"
"Try using a needle for metallic thread, the eye is larger and may help"
"I would try a new bobbin case, it would be the easiest thing to try and do,"
"It Will be a Hi shank...one did come with the machine,"
"Buy a new plate"
"15-91 is full size."
"Sounds like your bobbin tension is too loose."
"Normally this is caused by the upper thread not being threaded correctly. It is not on the..."
"That means your bobbin case tension is too tight."
"Go to Singers website and instruction books can be downloaded there."
"If the bobbin has thread on it, remove the thread so the bobbin is empty, it should pull..."
"If you will very carefully pry up the bobbin winder base by using pressure on both sides..."
"You can go the the Janome web site to find drivers for your computer. When you save..."
Load more activity...
42,916 people helped
View all achievements